Cost of Replacing a 2012 Ford Edge Key

Cost of replacing a 2012 Ford Edge key can be very expensive if you’re not prepared.

Recently, I misplaced (read: placed on the roof of my car) my 2012 Ford Edge key. Not knowing anything about keys, I assumed it was a relatively straightforward process to get a new copy. Not so much.

First and foremost, the key is a smart key, which implies there’s a chip embedded in the key that effectively talks to the car. I.e., if the key isn’t programmed to your car specifically, it’s useless. This also implies that most likely your local Walmart won’t be able to help you.

Feeling panicky, I got some quotes from the Ford dealer, with all sorts of prices that were effectively at least $500. I ended up finding a parts dealer and ordering the fob ($150) and the key ($25) and felt pretty proud of myself, since I was under the assumption that I could program the second key myself with at least one working key. That came quickly crashing down once I actually pulled out the manual and realized that I needed at least two already programmed keys in order to program another key. So, my second key really wasn’t a spare at all, and a spare would have been the third key had the dealer given me three keys, which obviously they did not.

I ended up calling around various Ford dealers to get quotes for “I have one programmed key and one unprogrammed key and need to program the unprogrammed one.” I got various prices ranging from $100 and upwards but eventually I got a dealer who quoted me a price of $50 to reprogram that one key.

During all of this, I did more research on keys. Apparently, I don’t really need the $175 magical key from Ford. On ebay, I found various sellers selling blank uncut transponder keys for around $15. As such, I would be able to take my two programmed keys and start programming the cheapo-deapo keys as backups. It didn’t matter that the keys were uncut, since the Ford Edge I had couldn’t be physically started anyway; the most the mechanical key could do was lock and unlock the door, but once in, you couldn’t start the car until the programmed key was within range.

The moral of the story as such is that for these new fancy keys, you really don’t have a spare and that you should immediately begin the process of programming a third (if not more) key. And, for the purposes of a true spare, it doesn’t need to be the official Ford key and can be a blank uncut transponder key.

Cost of replacing a “spare”: $250
Cost of replacing a true spare: $15

4 Replies to “Cost of Replacing a 2012 Ford Edge Key”

    1. Hi John,

      Sorry if it wasn’t clear. If you don’t already have two keys, you will need to do the more expensive option, that is, including “Ford Parts” and labor, it’s around $250.

      If you already have two keys, then you can program a spare key for yourself, without need of Ford. This comes out to around $15 if you buy a “blank” key off of Ebay.

  1. If you need a physical key to start the car (2012 Ford Edge SE), can a locksmith cut the key to your car’s specifications? I have both of my keys, but the unlock stopped working on one keyfob and the other is just janky.

  2. I purchased my 2012 Ford Edge used; it only came with one key, and I’m pretty sure it’s the “slave” key and not the “master”. To confound things further, I didn’t get an owner’s maual OR a keycode card for the door lock. That wasn’t a big issue, since I knew the original code is on a barcoded label in the car on the ECM (https://youtu.be/PhU_wvqbKg8). The bigger concern is only having to one key and the “key could not be programmed” alert I get when I start the car. I know I’ll most likely have to shell out the $250, but It’d be nice to know if the one key I DO have is the master or the slave key (Iread the master key has “FORD” embossed onit and the one I have does not) and not see that annoying message every time I start up.the car. Do you have any advice or suggestions? Thanks.

Leave a Reply

Your email address will not be published. Required fields are marked *